Boats sale by type
Boats by countries

sailing yacht Hunter 37 Sale info

Boat price$27900Year of built1981
Boat manufacturerHunterBoat model37
Boat type: sailing yacht
Boat name: Hunter 37
Boat length: 11.27m / 34.3ft
Price: $27900
Country: USA
Location: New Jersey, Forked River
Contact with seller by phone: 908 415 7349

Hunter 37 description

  • EVERGREEN, my much-loved Nor'Sea 27 - that I've owned and sailed since 1994 : is being offered FOR SALE BY OWNER. Both my wife and I have age and health concerns that highly motivate this sale; we are seeking a knowledgeable and caring new owner to give Evergreen a new home.
  • Deck structure made in separate water proof compartments. M: 50 deck designed for very rough seas with maximum protection for the crew and gears, it’s maximum heeling angle is 151°. All riggings can be used as “hands on Deck” or directly from the cockpit. Aluminum low profile ‘rolled edge’ bulwark with stainless steel mooring cleats. Two stainless steel pulpits one each on port and starboard side of the mast for safety when working at the mast.
  • The hull is a water cut, inside-outside, welded Cartel Aluminum. Hull color dark Blue, deck covered with white anti: slip protection on original aluminum. Cockpit trimmed by antireflection white color on the side walls and teak wood inside the cockpit walking and seating areas laid with black caulking. The stern design incorporates a bathing platform trimmed with teak slats and teak slats stainless steel steps and handle for access from the stern deck.
  • • Set 2: Quantum Main, Jib, Blue Spinnaker (2008) Good condition
  • • Set 3: North Sails: MIN, Jigb, Yellow and Green Spinnaker (2013) Excellent condition
  • Location: Costa Blanca, Spain
  • CONDITION: well maintained
  • Power : 35 kW (48 HP)
  • Weight: 14,000 kg (~ 30,870 lbs)
  • cabin(s): 2 cabin(s), 7 bed(s), 1 bathroom(s)
  • Length: 12.80 m (~ 41.99 ft)
  • Beam: 3.84 m (~ 12.60 ft)
  • Draft: 1.85 m (~ 6.07 ft)
  • TC 41 aft cockpit ketch. Main mast aluminum, mizzen wooden. Partial re: rig with new nylon rigging. Remaining rigging stainless, age unknown. Chainplates solid. Hull extremely heavily laid up and all but head intake thru hull replaced with new nylon and brass.
  • Fully protected skeg: hung hydraulic rudder with an additional custom made Windpilot .

Hunter 37

  • Beam: 12
  • Draft: 5
  • Description: cutter rigged cruiser w/sleeping for 7, marine head, sink and shower. Great bluewater sailor. Yanmar diesel, UPGRADES include: hull barrier coating, topsides stripped and re-epoxied and re-painted w/ 6 coats total. new ports and screens, new bronze thru-hulls, new bilge pump, new water piping, new transmission, interior woodwork has 7 coats marine varnish, Black bimini, dodger and connector, sailcovers.
  • Equipment: 8 ft. fiberglas dinghy w/ St. Croix davits.

Hunter 37 equipment

  • multiple anchors, lifejackets, CG equipment, fans, Galley includes: microwave, refrigerator, alcohol stove/oven, pressurized water system w/HW heater, Garmin GPS chartplotter, VHF, depthsounder, knotmeter.
  • on: board Instruments
  • Autopilot : Raymarine Autohelm Series
  • Fresh: Water Filter
  • Tiller : Emergency tiller
  • LOA: 31’ 7" (9.63 m.)
  • Beam: 16’0" (4.9 m.)
  • LWL: 31’0" (9.45 m.)
  • Fuel Tanks: Stainless steel (65 Gallons)
  • VHF : West Marine VHF 650 Uniden
  • Galley: Force 10 Marine Stove with oven (3 burner, electric)
  • Head: Jabsco Manual Compact marine toilet, Raritan Lectra Scan Type I
  • Tanks: Freshwater (30 gal), Fuel (50 gal), Waste (Lectra Scan 6 gal)
  • Generator: 4.5 KVA Fischer Panda
  • Engine: 3YM20 (3 cylinder, Yanmar, 20HP) Diesel, installed 2011
  • Draft: 3’2" (0.96 m.)
  • Disp: Disp: 7,200 lbs. (3,266 kgs.)
  • Sail area: 507 sq.ft. (47.1 sq.m.)
  • Auxiliary: 2 x 2006 Yamaha 8hp 4_cycle outboards