sailing yacht Precision 185CB Sale info

Precision 185CB equipment

• • Propane : 20 lb aluminum horizontal mount (brand new, not installed).
• Builder: Pacific SeaCraft
• Fuel Tanks: 1 Aluminum (18 Gallons)
• Beam: 8 ft 7 in
• Perkins 4: 236 85 hp diesel engine
• LOA: 27 ft 3 in
• Stainless steel centerboard, self-draining cockpit, kick: up rudder, full custom cockpit cushions, transom boarding ladder, sail cover, retractable motor bracket and Old Town electric motor. Includes tilt trailer in excellent condition.
• B&G 3: way Instument Package Wind Speed
• IJPE : 361.00 sq ft
• J: 12.25 ft
• P: 28.25 ft
• E: 10.83 ft
• I: 34.00 ft
• (2) Two: Speed Rigging Winches #40
• Flexi: teak on Cockpit Seats and Swim Platform
• 6 New : 6 Volt house battery system [2013]
• 2: 20 lb Aluminum Propane Tanks
• AH: 2 Antennae Tuner
• V: Drive
• Walter R: 10 (rebuilt 6/2012)
• Two PRO: FURL Roller furlings
• Interphase SE: 200 180` Forward looking Sonar
• ICOM IC: 735 SSB/Ham Radio
• Helm : tiller.
• By: pass valve on main to provide manual furling
• Winches: 2 Barient 36 ST Electric Primary, foot controls, 2 Barient 32 ST Secondary, 1 Barient St 28, 1 barient ST46, 2 Barient 27 Halyard and 1 Barient Halyard
• Topsides finish: Awlcraft 2000 Dark Blue with Gold Cove
• Bottom treatment: Interlux Interprotect barrier coat
• Keel: Centerboard
• LWL: 21 ft 5 in
• Gourmet U: shaped galley with plenty of storage and countertop workspace
• Gruent Refrigerator and Freezer: AC or DC operation, refurbished in 2006 with new hoses and brackets
• Sails: Main, Genoa, (refurbished 2008) Mizzen, Drifter (new) and Yankee 2001
• Masts and Spars- Applu Mil : Spec chromated primer, 3 coats 545 Epoxy primer and 3 coats Awlcraft 2000 white in 2006
• Reckmann RF90-2 Hydraulic System: Headsail Furling, Hood Hydraulic mainsail furling system hydraulic power unit New in 2006
• Propulsion: 2: blade bronzed prop on 7/8" stainless shaft
• Water: 30 gallon w/ manual pumps to head and galley sinks
• Fuel: 20 gallon
• 3 batteries : (1) for dinghy and dual master switch for other 2
• Spinnaker & pole : also Tacker to fly spinnaker without pole

Precision 185CB

• Draft: 4.10
• Beam: 7.4
• Description: • Tiller Autopilot
• Equipment: The Dana 24 is conceived for cruising and designed for performance. She is built to the standards of excellence that have always set Pacific Seacraft yachts apart. Quality is evident in every detail, from carefully fitted teak joinery to husky bronze fittings and impeccable mechanical installations. Crealock is well-known for cruising boats with exceptional performance, and Dana is the culmination of all he has learned. Sophisticated hull design, high ballast ratio and efficient sail plan provide stability and power for the kind of windward performance that is so often lacking in other pocket cruisers. Her beautifully traditional hull encloses an extraordinarily spacious and functional interior that is innovative and inviting. Her 6-foot 1-inch headroom, fully enclosed head, honeymoon berth and congenial main salon are but a few of her charms. A long list of standard features includes two-cylinder diesel power, winches, sails and full galley.

Precision 185CB description

• LOA: 28 ft 0 in
• Open interior with V: berth forward overhead opening hatch and privacy curtain. Main salon with center line dining table w/two drop leaves. Galley to port, head to starboard. Awarthships aft berth. Head includes marine head with holding tank, handheld shower,sink w/hot & cold water, teak shower seat, overhead opening port. Port cabin aft features a large awartships berth, custom mattress, 2 overhead opening hatches, 2 opening ports, 1 fixed port, engine access.
• Genoa: Incidens 34 sqm
• V: Birth
• Legendary, trailerable, gaff: rigged day sailor with Mastendr Quick Rig Sailing System. Green hull with white deck and cockpit. Aluminum spars. Only used in freshwater.
• Mast height: 34′ 6″ above deck
• The hull is built from Meranti Hydrotek BS1088. The boat is a one-of-a: kind. I built this boat myself in my garage from various types of wood. Every piece is hand made and detailed. This is the smallest functional wooden pirate ship I am aware of. It sails quite well as I have done a little bit of sailing with it on Lake Mead and Lake Mohave. She is still clean and very freshly built.
• This boat is an absolute head: turner. It may be small, but everybody will want to talk to you once you begin launching. Once you are under way, be ready for lots of other boats wanting to get a closer look.
• Headroom: 6′ 0″
• Ballast: 1,360kg (3,000 lbs.)
• Designer: Hunter Design Group
• Draft: 2’6” Board up / 6’.0” board down
• I have had a lot of inquiries about the interior of the sailboat: it is a bare hull. Freshly painted three coats of zinc primer, three more coats of epoxy coal tar on top of that. Due to the boat size it does not need framing there is 1 inch stingers to which 2 x 2 treated wood is screwed in, above the waterline, ready to be spray foamed. There are four through hulls that need to be welded shut, at lest that was my plan. or you could replace with sea cocks.
• Location: KINGSTON, ONTARIO
• LWL: 24 ft 2 in
• Beam: 10 ft 6 in
• perkins 4: 236 85 hp diesel engine
• Dan: fourth Anchor w/25' Chain and 125' Line
• 2: Group 24 Batteries (2012)