Boats sale by type
Boats by countries

sailing yacht Allied Seawind 30.5 Sale info

Boat price$24000Year of built1971
Boat manufacturerAlliedBoat modelSeawind
Boat type: sailing yacht
Boat name: Allied Seawind
Boat length: 9.29m / 28.3ft
Price: $24000
Country: USA
Location: Rhode Island, Wakefield
Contact with seller by phone: (508)982-1718

Allied Seawind 30.5

  • Beam: 9.3
  • Draft: 4.2
  • Equipment: bill.r.wadsworth@gmail.com
  • Description: Sadly we must sell because our needs have changed. Those needs are your bonus because its listed dirt cheap and way below value as we are looking for a quick sell. She needs some work but is a steal at this price...

Allied Seawind 30.5 description

  • Located in Wakefield, RI. is one of Allied Yachts Company's Allied Seawind 30' Ketch: Hull #148 of 161 built between 1962 and 1982. The Allied Seawind is the first fiberglass constructed yacht to circumnavigate the world. This circumnavigation and longevity on the water has given her a solid reputation as a soundly constructed seaworthy vessel. Convergence II has been lovingly maintained and upgraded by her owner and is ready for the next proud skipper of this legendary and historic yacht.
  • Draught: 5' 8" centreboards up; 7' 10" centreboards down.
  • KEEL: full, with two centreboards, one fore and one aft.
  • Height: of boat from bottom of horizontal keel shoe to top of dog house at highest point 14' 7".
  • Maiden Voyage: 2007-09: 16 (to date, has only been sailed in Great Lakes' fresh water).
  • Two new marine: grade batteries (2 years ago)
  • new bimini: Sunbrella 2 fabric (2 years ago)
  • Main sail & Jib : restitched by Baxter sails (2 years ago)
  • Registered Seattle, WA : Full Hull Survey 2003 with estimated Replacement Value of $750,000 ..
  • Includes: ’87 Evinrude Yachtwin 9.9 outboard with electric start
  • Well: equipped family sailboat, rigged for easy handling, even single
  • Hull Coating Exterior: rust acid etched, Rustlok primed and Awlgrip finished.
  • Hull Coating Interior: rust acid etched, Rustloc coated, and over coated with cork filled mastic. Entire interior between bulkheads insulated with fibreglass to circa 1Ѕ" to 2" in thickness.
  • Rudder : balanced, hollow rudder
  • Ballast: lead, 10,000lbs., poured into keel trough, fore of engine room..
  • Marina Group: 120 VAC 30 amp shore poer service with battery charger, 50' power cord, AC panel and three (3) GFI protected outlets (upgrade)
  • LOA: 60 ft 0 in
  • Fuel: 240 (120 x 2)
  • Out-of: State buyers can now buy and use their boat in beautiful Florida for 180 days with No Florida Sales Tax! Ask your EYS broker for details.

Allied Seawind 30.5 equipment

  • 70 lb anchor : 200 ft Ѕ chain, oversize wench &
  • Sails/Deck Gear: Handles 5 Sails, with 3 wenches not included.
  • •U: Line Icemaker w/ Bar Sink in Main Salon
  • Aluminum boom with 10: 1 outhaul and internal sheaves for mainsheet system; Outhaul moved to cabin top clutch
  • LOA: 30 ft 6 in
  • Beam: 9 ft 3 in
  • LWL: 24 ft 0 in
  • Plotter : Standard Horizon CP155C
  • GPS : Standard Horizon CP155C
  • Radar : Furuno Model 1720
  • VHF : Standard Horizon GX 1240S Ellipse
  • Heating : Taylor propane cabin heater
  • Interior Finish: epoxy and Endura polyurethane; gloss white paint and varnish.
  • Head Room: under deckhouse circa 6' 6"; under deck circa 6' 3".
  • Companionway: double door access; no sliding hatch. Under threat of being pooped,
  • Navigation area: to starboard of the deck house, and directly accessible inside the
  • Landing: large landing providing access to salon, galley, staterooms, toilets and shower. Well lighted open area.
  • Galley: positioned abaft the forward bulkhead, with sinks to port, and refrigeration to starboard
  • Forecastle: forward of the fore bulkhead, with a steel work bench to starboard, and cupboard space to port and starboard. Exit ladder through the booby hatch.
  • Lazarette: abaft the aft bulkhead, with sufficient storage for one set of 3 to 4 sails.
  • V: berth and two quarter berths. Head, sink, and ice box. Table and settees. 12v and 120v electrical systems. Deck, hull and keel in great shape without any delamination, soft spots, etc. Smooth, clean bottom, professionally cleaned and maintained. Yanmar 2GM diesel professionally maintained and updated. Complete sail inventory including updated main and genoa, plus spinnaker, spinnaker pole, and lines. Stainless streel rod rigging. Roller furler for easy handling of jib. Interior in good shape. Plywood on cabin floor needs refinishing.