Boat type: sailing yacht
Boat name: Catalina Fin
Boat length: 7.62m / 23.2ft
Price: $8800
Country: USA
Location: Montana, Flathead Lake Sommers MT
Contact with seller by phone: (310) 489-4325
Catalina Fin 76.2 description- A classic heavyweight long-distance cruiser designed by Peter Ibold. Endurance 35s have been built in steel, ferro and GRP : Erasmus is an 'aluminium' Endurance, built by Kingston Aluminium Yachts in Canada. Today she is in 'as new' condition, having undergone a major refit during the last four years. A new 29hp engine, the interior completely rebuilt and new electronics/instruments. Very good cathodic protection, monitoring and control unit. This yacht is in excellent condition.
- Tri: cabins preventive osmosis done,hull perfect condition,motor yanmar rebuilt 2014,
- I have an mx: ray sailboat, the mast, main sail rudder and daggerboard are all in excellent condition. it also includes a homemade beach dolly cart.
- For Sale: Iain Oughtred designed “Granny Pram”
- Contact Seth Muir: (415) 215 6291 or smuir@maritime.org
- Education Director: San Francisco Maritime National Park Association
- Construction: hot molded mahogany plywood hull, diagonal veneers; laminated mahogany backbone, rudder, and cabin house; laminated sitka spruce frames; plywood deck. Lead ballast, bronze fasteners.
- The design of the Oceanis 40CC is an ideal long: distance cruising yacht for a couple, but with the capability of accommodating four or five people in the greatest comfort.
- As far as her construction is concerned, there are no compromises: the structural inner moulding, glued and laminated to the hull, distributes any stresses from the rigging and keel. This technology combines reliability and strength and also provides perfectly finished locker interiors that are easy to maintain.
- http: //lecomteyachts.com/default.htm
- Builder: Starboard Yachts, Stuart FL : These boats are known for good looks, above average quality, spaciousness and steady, stable sailing. Great boat for learning or weekending at a reasonable cost. Good for lake or coastal cruising.
- Two rigs: 1. New teardrop: section sitka spruce mast, built according to original specifications by Dexter Cooper in 2001; internal halyards, three winches, seven coats varnish; needs hardware and rigging. 2. Oval section aluminum mast, external halyards, SS standing rigging, Dacron running rigging, complete and stepped. Spruce boom.
- Sails: Doyle Main, 1999, excellent condition, lightly used 5 seasons; Sobstad main, 1987, also light use over four seasons; older Hathaway main; 150 genoa; Sobstad working jib; spinnaker, drifter by Sobstad in 1987; used only four seasons, in excellent condition.
- Layout: Double berth forward, two single berths main cabin. New berth cushions 2015.
- Electrics: VHF, masthead lights.
- CONTACT: David Kiremidjian
- www.http: //texassailor.weebly.com/
- Present status, March 2017: in water, rigged, active.Topsides and bottom painted Spring 2016.
Catalina Fin 76.2 equipment- - Re: applied ablative bottom paint last season
- see www.freya52.comweb site for full details
- Raytheon RL: 9 LCD helm mounted radar mast mounted 2 KW Raytheon radome
- Cobra MS F: 80 Digital Selective Calling Marine VHF radio with cockpit speaker (2007)
- email: jibsail34@hotmail.com
- •Engine, inboard: Yanmar1GM10 (9HP) diesel, New filters, impeller, fuel and water lines
- •Prop: Bronze 12", 2 bladed, 1" shaft
- Log: speedometer
- •HOLDING TANK: New 6 gal w new macerator pump
- Jabsco marine flush (2003) with 25 gallon polyethylene holding tank with cross ventilation, Y: valve with pump out or macerator pump options (2003) vented loops on both head inlet and pump discharge lines. High grade PVC sanitation hose with double s/s clamps used throughout (2003)
- contact: Karl Wilmot, 20 Ridgeview Drive, Keswick Ridge, NB E6L 1R2
- (506) 363-3165 or (506) 383: 3565 Karl.Wilmot @gnb.ca or metricmountie@hotmail.com
Catalina Fin 76.2 - Beam: 8.5
- Draft: 5.5
- Description: You can see the work done at:
- Equipment: Entire interior repainted
|
