Boat type: sailing yacht Boat name: Chrysler Barracuda Boat length: 3.96m / 12ft Price: $500 Country: USA Location: Pennsylvania, Thompson Contact with seller by phone: 570-756-2089
Chrysler Barracuda 39.6 equipment- Spinnaker & Pole, Main Sail & Jib (good condition). Standing & Running Rigs : all good, cockpit cover, jib cover (new), winter cover & frame, varnished oar & bronze oar lock, hand bilge pump, 2 life jackets, anchor & line, teak name boards
- Keel: Modified full
- Propeller: 3 blade bronze propeller
- Fixed 3: blade propeller
- Balmar ARS: 5 voltage regulator with temp sensor *** 2013
- Sleeps 7 comfortably, 2 in V: Berth, Single salon to Starboard, Double salon to Port. Custom 3” memory foam mattress toppers in forward and master cabins *** 2011
- Large fold: up table in salon, expands for double bed.
- Fuel: 95 Gallons
- Water: 180 Gallons (3 separate tanks)
- Holding: 35 Gallon Dometic tank with filter system *** 2010
- Seaward 3: Burner Propane Stove w/ Oven on gimble
- RUNNING RIGGING: double braid lines throughout *** 2011
- Mainsail: fully battened with 2 deep reefing points, cockpit controlled
- Lewmar self: tailing genoa sheet and main halyard winches
- • Hulll: mounted zinc anode
- • DC-to: AC power inverter, AT 2000W, 4000W peak
- Oven : with gas cut off solenoid
- Log: speedometer
- Inverter : 12v/220v 1000 W and 12v/115v 1000w
- TENDER: AB Vetus 2.9m with Yamaha 5hp OB
- Stern-rail: mounted Force 10 Propane BBQ in aft locker.
- Wind: Clipper 2012
- VHF – Icom Ic: M59 & One Hand held VHF Humminbird
Chrysler Barracuda 39.6 description- Steering: Inboard rudder, tiller steered. The rudder is NEW with NEW rudder post bushings, a common failure area on older Pearsons.
- Cabin: Refit needs to be finished. Galley equipment is included, including Origo 2 burner alcohol stove and sink. Head has received NEW toilet and NEW holding tank, so that stinky job is DONE! Bulkheads are solid. Cushions are clean, but worn and due for replacement.
- Fitted with in: mast furling and with an electric winch to control the mainsheet and genoa furling, the rig of this boat is easily handled, together with the bowthruster this yacht can be sailed shorthanded with ease.
- extras included: old mast can use for spare hardware, cleats and blocks
- Made by Jenson Marine in 1976, this Cal 2: 27 is ideal for racing and family fun. The boat is covered by Boat US full insurance and documentation is available. The bottom was recently cleaned and this service is available on a regular basis. It is berthed at Berkeley Marina O Dock 406 which leads directly to the Berkeley Yacht Club.
- Pearson 30s are well-regarded cruiser: racers, well constructed and seakindly with a decent turn of speed. ! This freshwater Pearson 30 your chance to build YOUR boat YOUR way, affordably!
- I don't want to scrap her out: I want another dreamer to have the chance to afford his or her dream.
- Auxiliary propulsion and mechanical: Atomic 4 engine installed. The engine turns over with good compression. Fuel tank is clean and in good condition. Comes with Martec folding prop.
- Hull and deck: She has recently had her hull faired and topsides and deck painted, 2012: 2014. Hull and deck both sounded well before purchase, with no springy spots noted. Hull is solid laminate, no core. All deck fittings and winch gear are included in sale, but will require installation and bedding in the spring.
- S&S well loved classic ocean racer : cruiser. Semi custom, 23# of 25 built. Handlaid strong FG construction. Exceptional sailing performance, steady tracking and high stability
- Major upgrades : Recent bottom job, new LPU topsides and bottom and prop and shaft log and coupler, bronze thru hulls and valves updated, . recent forestay and Profurl furler refurbished, New Kiwigrip deck and cabin top coatings,
- Rose of Sharon is a 36’ fiberglass sloop-rigged auxiliary sailboat. She has a center cockpit with pedestal wheel steering, Cream-colored hullsides finish with blue stripe. Brown deck Treadmaster replaced with non: skid white. Anodized aluminum mast, double spreaders and boom with stainless steel wire standing rigging, bronze/stainless steel turnbuckles and fittings, and Dacron running rigging. Roller furling headsail. Blue sail covers and cockpit dodger/bimini. Stainless steel bow/stern rails and aluminum stanchions with double stainless steel wire lifelines. 10 aluminum opening ports and 4 aluminum deck hatches. Inboard diesel auxiliary engine and 3k generator. Maximum estimated speed under power is 6 knots; estimated speed under sail and power 8 knots.
- The SPINDRIFT 46 was built by Formosa Yachts using the same molds that built the FORMOSA 46. (1980: 1984). R. Hillier, of Brisbane Australia, oversaw the building of this yacht which was to be sold in the US for Bristol yachts of Newport Beach CA. For the Australian market, they were called the HILLIER/PETERSON 46. Hillier ran afoul of designer Doug Peterson who filed a law suit. Hillier died and the suit was shelved.
- All of the hard work has been done: the painting, the fairing, the head installation. Install the deck hardware, splash, step the mast, bend on the NEW main and hank on a jib and you are sailing! Currentlly, she is an IDEAL beer can racer with the cabin stripped down.
- The boats sale is As: Is, and Where is, it is currently on the hard at an auto/marine mechanic in Niagara Region, Ontario, Canada where there is access to Light & Power included in the monthly storage.
Chrysler Barracuda 39.6 - Beam: 3
- Draft: 3
- Description: 1970's Sailboat in good overall condition considering its age. Missing sail and boom to make it a complete boat. Mast, shrouds, rudder, and two dagger boards in good order. Located in North East Pennsylvania
- Equipment:
|