sailing yacht Dyer Dhow 21.6 Sale info

Dyer Dhow 21.6

• Description:
• Equipment:

Dyer Dhow 21.6 description

• Rig: Herreshoff Schooner “Carpenter”
• Sails: Custom made in 2014 by Gambell & Hunter Sailmakers of Camden, Maine
• Hull: ѕ” Cedar Strip plank construction on hardwood laminate.
• Dual, in: line dagger board casings
• Well: maintained long shaft motor in motor well.
• Email: rbthompson@maine.edu
• Ballast: 6000 lbs, lead keel
• The term Watson: class lifeboat refers to several wooden lifeboat classes operated by the Royal National Lifeboat Institution (RNLI) around the coasts of the United Kingdom and Ireland between 1888 and 1991. The boats had hulls that conformed to the basic design laid down by RNLI naval architect George Lennox Watson.
• 1986 Hobie 16 "HOGSBREATH 1000" Catamaran -: That year the best Hobie racers in the world competed for five days across 694 miles of open Gulf of Mexico waters in what is considered one of the most grueling offshore sailing marathon races in the world. There were twelve teams from six countries. This boat which I am selling was one of the three Australian boats entered in that race. And the Australians won!
• Even with all the upgrades : The boat is Racing Class Legal for all Hobie Sanctioned races.
• LOA: 72 ft 0 in
• Beam: 17 ft 10 in
• Windswept II is well equipped for coastal cruising or offshore passages with oversized rigging, Furuno Radar, Garmin Chartplotter, Webasto diesel forced air heater, X: Power Inverter, Profurl roller fuller w/ 160% genoa, Fourwinds II wind generator, Monitor wind vane (not installed), 35 lb CQR anchor w/ 200' of 5/16" BBB chain, WestMarine 10' rigid bottom inflatable w/ 3hp Yamaha OB, Kenwood SSB, 406 EPIRB, newer Bomar salon and foredeck hatches (2012), canvas dodger (2012), and asymmetric spinnaker (2013).
• Construction: Solid hull, balsa core deck
• Power: Sail, 3 cyl Yanmar diesel
• Location: BELLEVILLE, ONTARIO
• This boat has had numerous upgrades since 2011-16 including the following: Standing rigging, new sails, LED lighting, Cutlass bearing, Engine mounts and alignment, safety equipment, rebuilt starter motor, new running rigging (2014), owners manual, 3 way battery switch, salt water pump, flywheel seal, navigation instruments, numerous navigation charts for Bahamas and Caribbean Islands, US and Canada, throttle control unit, Salon upholstery (2015), spare parts with extensive tool kit. Bottom job done 2014, salon cushions recovered in 2015, seat woodwork replaced in 2015, electric head 2016, new Force 10 stove (2016), new Norcold fridge (2016) and the list goes on.

Dyer Dhow 21.6 equipment

• Shower, hand: held w/ sump pump, 12 VDC
• Tape: drive headsail
• ICOM IC: M700 Single Sideband Radio
• HOURS: 1005 (7/9/16)
• * Sails -: color "Tidal Wave". One set main and jib in excellent shape.
• * Sail Tube -- "SSI Toy Box" -: rotomoulded very large storage for sails, booms, tillers and more.
• * White Hulls -: solid dry hulls, no soft spots, very tight boat.
• * Halyard Grip Kit -: this is a guide installed on one side of the mast, that you guide the jib halyard through before securing it. Holds the halyard against the mast, keeping it out of the way and preventing the jib battens from hanging up in the halyard, allowing for smoother and quicker tacks, especially in light winds.
• * Mast Hinge Kit -: Murray's heavy duty mast hinge which is stronger than standard Hobie hinge and helps keep everything lined up when raising mast.
• * Dakine Catamaran Footstraps -: on the top rear of each hull. Allow you to lock a foot in and securely trapeze from the extreme far rear of the hull. Serve dual purpose as a carry handle. Nothing like sailing on a broad reach in 20 to 30 knot winds out on the trapeze and hanging off the aft end of the boat.
• * Jib traveler kit -- Trentec super low: profile 1552 jib cars needed for racked back masts combined with low profile color coded lance cleats.
• * Harken 6-1 Low Profile mainsheet system -: 57mm line, light weight system, low profile with ratchet and light air modes. Unloaded runs freely during mark roundings and jibes.
• * Aussie Jib Halyard system : Reduce mast compression by 66%! The Aussie Jib Halyard Kit allows easier tacking, better mast rotation and consistent mast bend! Includes Hobie tramp zip pouch allowing you to secure the extra line on the tramp out of the way untangled.
• Engine Brand: Universal (w/ original documentation)
• Double life: lines (New in 2015) w/ 24' stanchions, stainless steel
• Universal M18 Fresh: Water Cooled (2) Cylinder Marine Diesel.
• Large Ice: Chest / Box with 12v refrigerator
• -(2) B24 Self: Tailing (2 Speed Cockpit / Genoa / Primary
• Beam: 10 ft 0 in
• LWL: 26 ft 3 in
• Force 10 3: burner propane stove with oven
• 4 winches: 2 Wimaq, 100% Lewmarkopie, Niro; 2 Barbarossa 1 Barbaroosa for halyard, 2 Pertinaxratschen for incident
• Builder: Beneteau (USA)