Boat type: sailing yacht
Boat name: Ericson 25
Boat length: 7.62m / 23.2ft
Price: $6500
Country: USA
Location: Illinois, Crowleys Yacht Yard Chicago
Contact with seller by phone: 3124371304
Ericson 25 equipment- Y: Valve
- Hull: cored fiberglass
- Deck: cored fiberglass
- J: Prop propeller
- Azzurra was outfitted with a custom designed interior for cruising by her previous owner. Moving aft: fore, she has a cozy galley area to starboard, and pilot station w/ berth to port. Next a single head w/ electric toilet to starboard, and fridge unit w/ prep station to port. Continuing into the main salon, the primary navigation station is to starboard, and another single "coffin" berth to port. The salon hosts a large table and couch settee to port, and single couch/day bunk to starboard. Continuing into the forward cabin, a double bunk to port and single to starboard, with storage below each. In the forepeak a spacious storage area exists with foul weather gear rack, storage shelves, tool space, and sail lockers in the bow. New LED lights illuminate the main cabin area.
- CHART PLOTTER: Raytheon RC425 at nav desk feeding to one deck Raytheon Pathfinder RL80C
- INCLUDED: Main and #1 genoa 2 years old (Quantum), #3 jib 1 year old
- BOW ANCHOR : Delta wih 60m x 10mm chain and 50m warp
- Electric windlass : Lofrans 1500 watt for chain and rope and can use independently
- Alternators: x 1 with Sterling Smart Charge regulator for faster charging
- Other: Fitted cockpit cushions, full deck cushions and foredeck cushions press stud fastened
- Inverter : 1 x small for laptops etc plus 1 x larger
- LOG / SPEED : 2 x Raymarine ST60 Tridata
- Cradle, Raymarine Auto Helm, Balmar Duo: Charger, B&G Instruments, VHS Radio, Garmin GPS Map378. Comes with 13 sails.
- Designer: Hunter Design Team
- The price includes a two: axle trailer with 6 adjustable stands. The trailer was built in 2012 and was designed to receive a conventional 30 feet sailboat
- MAST AND RIGGING: Aluminium mast, boom, standing and running rigging. tiller and spare, winches etc...
- COOLING SYSTEM : Salt and freshwater via heat exchanger
- Sturdy steel hull : 1/4" above the waterline, 5/8" thick up to the waterline, 1" thick shoe
- Vacu: flush electric head
- Builder: Beneteau (USA)
- Sails: Main and furling jib
- Engine: Nissan 9.8 hp long shaft outboard in excellent condition
- Instruments: VHF, ritchis compass, SR instruments depth and speed. (condition unknown) Shorepower
- Interior: Full interior with galley, enclosed head, private fwd stateroom. Full cushion set sleeps 5
- LOA: 35 ft 6 in
- Beam: 12 ft 0 in
- LWL: 30 ft 7 in
- Force 10 : propane stove with oven
- Fuel Tanks: 1 Stainless steel (12 Gallons)
- Electrical: 3 new deep cycle batteries, battery charger, voltmeter, AC?DC panels, 1000w inverter
- Dinghy: 2007 Achilles with 2011 6hp Yamaha 4 stroke outboard
- Weight : 700kg approx
- I recently installed a thru: hull fitting in the motor mount area to allow for an external gas tank to be mounted below deck. It works great and the tank, which is wedged under the cockpit, doesn't move even under the windiest conditions.
- Dive gear : 7 steel 80 tanks, 3rd lung for Hookah, 100' hose, scuba gear for 5 people
- Guardian G: 55 anchor mounted aft, 15' 3/8" BBB chain and 300' 3 strand nylon line on a reel
- ICOM IC: M710RT 150 watt SSB/HF radio
- Rigging: NEW 2002 by Brian Toss, swapped end for end 2007!
- ground tackle: 25 lb : 35 lb CQRs, each has 50' of chain and 300 ft of 5/8 twisted nylon line on each anchor; two 22 lb Danforths
- Builder: Don and Tamar Clark
- LOA: 54 ft 6 in
- LWL: 51 ft 0 in
- As you enter the cockpit area, you will find comfortable seating on both sides, and a sun: blocking custom hard bimini, and removable side curtains. The protected helm is well situated to the port side of the companionway which leads to the main cabin, where the accommodation spaces are attractively finished with varnished Alaska yellow cedar hull surfaces and wood trim throughout. The overhead and bulkheads are coated with polyurethane paint.
- Fuel Tanks: Fiberglass (30 Gallons)
- Batteries : 2 house and starter
- Fuel: 400 liters
- •Well insulated super-efficient top: opening refrigerator with Adler Barbour 12 volt compressor and holding plate
- Log: speedometer
- KEDGE ANCHOR : Danforth type with 20m chain and warp
- GPS : See plotter
- Primary: 2 x Harken 64.2 self tailing
- COACHROOF : 1 x Harken 44 two speed self tailing
- CABINS - 3 / 4 : plus two berth cabin with heads
- Toilets: 4 plus crew heads
- Cooker : 4 burners with oven and grill
- HEATING SYSTEM : 4 x warm air heater 220v portable
- SUN AWNING : Fitted in track to boom
- Bilge Pumps: 1 x automatic plus 1 x manual
- Life raft: Yes, 10 person (needs service)
- BATHING PLATFORM : Sugarscoop transom with swim ladder
- Lewmar self: tailing genoa sheet and main halyard winches
- U: shaped galley w/ double sink.
- Westerbeke 4: cyl. diesel, fixed prop, 165 amp alternator, smart regulator.
Ericson 25 description- LOA: 19.98 m
- LWL: 41 ft 0 in
- Engine: 2015 Beta Marine
- Location: BELLEVILLE, ONTARIO
- This boat has had numerous upgrades since 2011-16 including the following: Standing rigging, new sails, LED lighting, Cutlass bearing, Engine mounts and alignment, safety equipment, rebuilt starter motor, new running rigging (2014), owners manual, 3 way battery switch, salt water pump, flywheel seal, navigation instruments, numerous navigation charts for Bahamas and Caribbean Islands, US and Canada, throttle control unit, Salon upholstery (2015), spare parts with extensive tool kit. Bottom job done 2014, salon cushions recovered in 2015, seat woodwork replaced in 2015, electric head 2016, new Force 10 stove (2016), new Norcold fridge (2016) and the list goes on.
- To see her in action : please search for "216 lake fairview" on you tube.
- Builder: Bob Tolbert, Everett, Washington
- Designer: Bruce Roberts & William Garden
- Important : this is special stainless steel Doutche boat.
- Beam: 14 ft 9 in
- Because it's a pre: 1972, does not appear to have a valid HIN.
- This appears to be unregistered. Because it's pre: 1972, it will need to have a valid HIN supplied by the DMV, at which point it can possibly be registered (ask the DMV).
- un: varnish and 30 affixed linseed oil layers put on the hull.
- The price includes a two: axle trailer with 6 adjustable stands. The trailer was built in 2012 and was designed to receive a conventional 30 feet sailboat
- neptunkryssare.se
- • U: shaped galley with large counter space; integral trash bin, drawers and storage
- • Un: stayed Composite masts
- LOA 23' ; Beam 7': 5" ; LWL 22' ; Disp. 1900# ; Draft 4.5' board down; 8" board up.
- needs tlc-: 150000us for quick sale
- Anchor : CQR 72 lbs 100 mt chain of 12mm(2008)
- Electronics: VHF ICOM 411 EPIRB McMurdo GPS Standard Horizon 150 X 2 x Autopilot Raymarine ST6001 – Hydraulic Drive (2008) Radar FURUNO 16 mg (2008) NAVTEX NASA
- AIS NASA Bilge Pumps: 2 electric (RULE PUMP) 1 manual (handle from the cockpit)
- Sails: Genoa Mainsail DOYLE (2008) (ANTAL cars) Genoa Mainsail (2010) (ANTAL cars) Gennaker Mizzen Staysail
- GENERATORS: Air Breeze Wind Generator (2014) Diesel Generator Whisper 3.5 (2008) 3kW
- Outboards : Honda 2.3 hp (4 strokes) Suzuki 6 HP ‘’
- Dinghy : AB 2.3 mt fiberglass keel.
- Nautitech 395, entirely refited in 2011, 2 Yanman 3YM30: 400 hours, New SD2O etc. The boat is equiped with solar panels, 110volts diesel Generator, wind Generator, Watermaker,. The boat is French registrated but still has his US papers in storage. It si one of the Nautitech exported to the US by the manufacture. Ready to go!
- The Gemini 105M has a large U: shaped dinette surrounded by the galley to port and the nav station to starboard. There are 4 opening hatches giving ample breeze to the main cabin. Accomodations include a spectacular master queen stateroom and 2 double quarter berth cabins, one in each hull, The large shower/head area is located in the starboard hull forward; 6'4" headroom and safety glass throughout; This boat is a super cruising boat, Health issues force this sale. Also a liveaboard slip available.
- • L: shaped settee w/Reggae Spruce upholstery with storage under
- The Hunter 33.5 is known to be agile and user friendly with her fractional: rig. Designed with a spacious, comfortable cockpit for entertaining, a walk through transom with swim platform for simple stern boarding from the dock. The interior is roomy and bright with an open floorplan, lots of headroom and storage space and a separate aft Cabin.
- Dimensions: 12.75 x 3.72 x 1.68 Meters
- KEEL: stepped mast. All standing and running rigging replaced 2008. Also new lifelines and stern rail.
- Layout - V: bunks, head, dinette/settee, galley, nav table, quarter berth. Extensive storage throughout!
Ericson 25 - Beam: 9.25
- Draft: 4.92
- Description: Nice freshwater 1980 Ericson 25 sailboat with Nissan 9.8 outboard motor mast, boom, sail, standing and running rigging in good condition. Left at the boatyard and looking for a new home> Yard has clear title. Located at Crowley's yacht Yard in Chicago and can be viewed any time. Just call for an appointment. Boat is offered as is where is. Prospective buyers are strongly encouraged to carefully inspect boat and associated gear before making an offer.
- Equipment: Includes, Boat, Mast, boom all standing and running rigging and Nissan 9.8 hp outboard motor.
Ericson 25 - : sufficiency and good ventilation. The designer commented that “she is long in order to provide comfort sailing in the ocean, wide for stability in extreme conditions, but simple in construction, accommodation and systems. She’s an excellent performer, and has a very comfortable motion in waves”. The concept of the Juniper 2 is a new design incorporating several refinements and improvements from her predecessor. She is wider overall, has a longer and finer bow, and uses a balanced spade rudder instead an outboard hung rudder. Aesthetic details such as the crossbeams and their fairings and the sheer line were refined. The hull underwater shape has less wetted surface than the original and the fin and rudder sections were refined for less drag. The interior layout was refined to increase elbow room and now incorporates a dedicated shower stall. Incorporating a ketch rig that is an absolute joy to handle, tacking is a matter of just turning the wheel. The crossbeams are very high above the water and there are no cabin projections beyond the hull sides. These features eliminate pounding in rough seas, contribute to her comfort underway, and was designed and built for safety and survivability offshore. Her interior and exterior finish is excellent. All systems and equipment were installed and have been carefully maintained and upgraded with an eye for simplicity, reliability and serviceability.
Another sailing yachts for sale in USA |
