Boat type: sailing yacht
Boat name: Hunter 33
Boat length: 10.05m / 30.6ft
Price: $9900
Country: USA
Location: New Jersey, Chestnut Neck Boatyard
Contact with seller by phone: (609)705-2654
Hunter 33 equipment- Steering: Tiller wheel system (not installed)
- Total Power: Diesel Universial M18;15 HP
- 1 unit : Air conditioning units WITH Heating
- VHF : Cobra DSC
- Engine: VOLVO PENTA 23hp (fully overhauled)
- Sails: Genoa, Main, Mizzen Stay Sail Storm Gib
- Safety equipment: Extensive list of safety equipment and spares suitable for cruising.
- Dinghy: 9’ hypalon Zodiac
- Compass Make / Model: 2: Ritchie Powerdamp mounted at binnacle, universal handheld at chart table
- WIndlass: Electric Windlass
- Cradle: Folding Steel
- LOA: 50 ft 0 in
- LWL: 47 ft 0 in
- Fuel Tanks: Plastic (132 Gallons)
Hunter 33 description- Construction: Marine Plywood on oak frames, beams of laminated mahogany. One layer of glass fibre bonded to wood during construction.
- Beam: 8 ft 11 in
- Hull was stripped of antifouling and all bottom paint in 2012, keel was rustproofed and hull epoxied prior to new anti: fouling. Sails were cleaned and serviced in 2014 and are in great shape for their age. Comes with a North Sails geneker and snuffer. Boat converted to propane in 2013 and new Force 10 3 burner stove installed. All interior and exterior 12 volt lights are LED, including nav., deck and anchor light with light sensor. Engine in excellent condition with Balmar Serpentine pulley system, 3 blade adjustable J Prop and line cutter. Boat saw minimal use for 10 years by previous owner.
- Log: speedometer
- I have had a lot of inquiries about the interior of the sailboat: it is a bare hull. Freshly painted three coats of zinc primer, three more coats of epoxy coal tar on top of that. Due to the boat size it does not need framing there is 1 inch stingers to which 2 x 2 treated wood is screwed in, above the waterline, ready to be spray foamed. There are four through hulls that need to be welded shut, at lest that was my plan. or you could replace with sea cocks.
- Builder: Fountaine Pajot
- LOA: 28 ft 2 in
- Fuel Tanks: 1 Aluminum (220 Liters)
- Draft: 1.22m (4′ 0″)
- LWL: 22 ft 2 in
- Ballast: 3500 lbs
- Mast height: 34′ 6″ above deck
- Headroom: 6′ 0″
- Model 31"Off-shore Ketch, Co: designed by L. Francis Herreshoff and Cheoy Lee shipyard.
- Well: kept and meticulously maintained with a white hull, black bottom, with red and blue boot stripe. Rod rigged C&C that has been dedicated to cruising through. She is certainly more than capable of racing. In the classical C&C fashion, she is appointed beautiful teak interior all around with a well thought out plan sleeping 6.
- 2014 : New trans; engine repainted; new teak & holly sole
- 2011: New air condition. New interior cushions
- Excellent condition. Beautiful, captain-owner maintained sailboat sloop. Built in Maine, varnished on: deck teak, varnished Honduran mahogany down below, recent A plus survey. Sunny slip with locker, close to town. Parking pass for downtown Sausalito. Hull Awlgriped black with gold cove stripe. Classic Sparkman & Stephens design.
Hunter 33 - Description: 1968 Johnson C Scow for sale in good condition. Also I have a Minnekota trolling motor(no battery) $50.
- Equipment: Comes with trailer, rigging, sail, tiller extension. Good shape!
- Draft: 5.25
- Beam: 10.17
|
