sailing yacht Watkins 27' Sale info

Watkins 27' equipment

• V: berth includes 2 single berths. Storage shelves overhead with 12 teak drawers below. Large hanging locker aft to port.
• L: shaped settee to port, Galley & Nav area to starboard
• Head is aft to starboard in walk: through to aft cabin. Head features marine toilet, shower, vanity with SS sink, linen locker and access to engine.
• Shower/ bath: 2x bathroom with shower , both repainted in 2014.
• Yaesu FT: 857D SSB w/remote ATU
• Empty: 57320,15 lb and 66138,63 lb loaded.
• Oven 2011: Force 10 stainless steel oven.
• Keel / sword: continuous keel box, Rudder hangs on rear keel.
• Other: The shower in aft cabin was renovated in 2008.
• Material / color: Teak, Mahogany carrot / walnut cabinet doors.
• Cabins: aft cabin, saloon, 2x in front cabin.
• Cooker / Stoves 2011: Force 10 4 burner stainless steel stove.
• Additional : Buyer will need to ask about these.
• 6: 1 mainsheet with ratchet block and cam cleat
• Tack: Tick knot meter / depth meter on starboard
• Mainsail: Doyle in Stackpack sail cover / cradle, with lazy jacks and 2 reefing points
• Headsail : 150% jib on Harken roller furler
• Staysail: yes on Hood roller furler, quick disconnect
• Water: 2 x 40 gallons = 80 gallons total … stainless steel
• Keel: stepped aluminum mast with Strongtrack
• TV 2010: Samsung SyncMaster HDTV.
• Winches: 52st 2x, 2x 45ST (all winches are recently serviced).
• Spars: aluminum white sprayed France Spar masts (hoordmast is rigged), booms, stainless steel rigging and double spreaders in the main mast.
• power : Ford Lehman 2715E 6 cylinder 4 stroke (engine number S125832)120 hp / 88 kW.
• Birth Place: Steenbergen, The Netherlands
• Designer: William Garden, USA
• Toilet: 2x manual RM69 toilet.
• Hull length overall : (ie including bowsprit) is 57,41 ft, hull length is 51 ft.
• 1 S: 2A Propane/CNG Fume detector whit solenoid valve
• 1 Anchor: DANFORTH 15 with 100 Feet of chain and 100 feet of Nylon rope
• 1 Compas: Ritchie powerdamp 5 ''
• Engine: New Nanni diesel N4.60 turbo 60hp ( Kubota engine block ) Installed Summer 2015
• twin 6: volt bank for starting
• 3: burner LPG stove/oven
• Teak decks, molded non: skid on deckhouse, high bulwarks, center cockpit, 30" high double lifelines.

Watkins 27'

• Beam: 10
• Draft: 3.5
• Description: This is a wire funds transfer transaction. Can be handled one of two ways. Through local national banks near Southport or through my attorneys escrow. I will cover the cost for a professional Maritime company for either a Domestic or Foreign sales transaction to assure proper Bill of Sale, Documentation, and transfer of ownership.
• Equipment: 3.5 HP Outboard Tohatsu

Watkins 27' description

• https: //www.youtube.com/watch?v=S2khOdzqk3M
• UPDATE: The life lines are on with connectors repaired!
• Bidding Opens : November 12th, 2014at 12am EST
• T: Gull 25 folding production trimaran designed by Dick Newick # 1 out of mold
• Extensive work: bench and tool/parts storage area located in companionway to aft cabin
• Huge fore: deck with large storage locker integrated into the superstructure
• The hull is a water cut, inside-outside, welded Cartel Aluminum. Hull color dark Blue, deck covered with white anti: slip protection on original aluminum. Cockpit trimmed by antireflection white color on the side walls and teak wood inside the cockpit walking and seating areas laid with black caulking. The stern design incorporates a bathing platform trimmed with teak slats and teak slats stainless steel steps and handle for access from the stern deck.
• Fully protected skeg: hung hydraulic rudder with an additional custom made Windpilot .
• Deck structure made in separate water proof compartments. M: 50 deck designed for very rough seas with maximum protection for the crew and gears, it’s maximum heeling angle is 151°. All riggings can be used as “hands on Deck” or directly from the cockpit. Aluminum low profile ‘rolled edge’ bulwark with stainless steel mooring cleats. Two stainless steel pulpits one each on port and starboard side of the mast for safety when working at the mast.
• NEREIA is a beautiful Robert Perry designed blue water cruising cutter made to sail the world. She is heavily built by the well: respected TaShing yard, and completely outfitted for cruising in the islands and beyond. With many upgrades and recent maintenance, Nereia is the boat to live out your dreams aboard. She can be easily sailed by one, can sleep 5 if needed, and would be perfect for a solo sailor, cruising couple or small family. The Baba series was intended as a modern interpretation of the classic Colin Archer double ended workboats, which were known for their predictable handling and ability to weather any conditions. With a thick fiberglass hull, proud bulwarks and clean lines, she is a joy to see and sail. The owner has completed two years of living aboard and sailing through the islands from the Gulf Coast to the Virgin Islands, and now finds it time to return to the States for work. His change of plans is your opportunity. An amazing adventure awaits you on the waters of the world.
• Sails: Regatta Quantum Jib, Practice Quantum Jib, Practice Quantum Main
• Dinghy : Zodiac RIB Hypalon 10′ 3” (purchased in April 2014)
• Anchor : 73# Rocna, 3/8 chain length size, 200′ line length/size
• Dinghy outboard: Yamaha 15 hp (purchased in March 2014)
• Bow thruster: Vestus 12V 55 KGF 3500 rpm
• Air conditioner: Forward Taylor made VCD 16,000 BTU, Aft Taylor made VCD 12,000 BTU
• more info: https: //drive.google.com/drive/folders/0Bx_TDBm7RVOBU1lnaUpnVnRLQU0?usp=sharing